hydrostatic test
英
美
n. 静水压试验
双语例句
- We shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
我们将为奥氏体不锈钢管的水压试验引进净水。 - Main pipe Line Hydrostatic Test;
释放主管路水压试验； - Hydrostatic Test Technique Used for Alaska Pipeline in Severely Cold and Frozen Earth Areas
阿拉斯加高寒冻土区管道水压试验技术 - Hydrostatic test, Pneumatic test, Test pressure, Test temperature, Vacuum vessel, Combination units.
液压试验，气压试验，试验压力，试验温度，真空容器，组合容器。 - The hydrostatic test and function test had been carefully performed by HHI in their offshore yard during jacket fabrication.
在该导管架建造阶段，HHI在海洋码头对导管架调平和灌浆系统进行了水压试验和功能试验。 - Research on Mechanical Properties and Structure Design of Petroleum Tube and Casing Hydrostatic Test Unit
上下活动套管的装置油套管水压试验装置结构设计及力学性能研究 - Following applicable product specification, hydrostatic test is required for steel tubes to ensure the quality.
为保证钢管质量，相关标准要求对钢管进行水压试验。 - The utility model is suitable for testing the plastic pipe in the hydrostatic test and the blasting test.
本试验装置适用于静压试验和瞬间爆破试验检验塑料管材。 - The Finite Element Analysis of the Large Deformation of Filament Wounded Case in Hydrostatic Test and Firing Test
复合材料壳体在水压和地面热试验状态下的大变形有限元分析 - Effect of hydrostatic test on material properties of air cylinder for metro vehicle
水压试验对地铁车辆储风缸材料性能的影响 - The analysis of leaking reason in the wall reheater during hydrostatic test on A Power Plant REASONS FOR LEAKAGE OF INTERNAL PIPE OF DOUBLE-PIPE HIGH PRESSURE AMMONIA HEATER AND TECHNICAL IMPROVEMENT
某电厂300MW亚临界压力锅炉墙式再热器水压泄漏原因分析套管式高压氨加热器内管泄漏原因分析及技术改进 - Hydrostatic test plugs will be provided for all the spring loaded safety valves.
每只弹簧安全阀都带有水压试验堵塞及试验压紧工具。 - The systematic hydrostatic test ( dry run, hot test, dynamic test, actual start-up) is scheduled for next Monday.
系统水压试验（习、热试验、力试验、际开车）于下星期一进行。 - The machine imports, pumps, pump shell structure strong are the hydrostatic test, the mechanical shaft seal, stop leakage effect is good.
整机进口，泵浦结构坚固，泵壳皆经水压试验，采用机械轴封，止漏效果好。 - Put the food inside the inner pot, heat to boil for five minutes. Differences between chinese standards and ASME code for hydrostatic test of utility boiler
将内锅移入焖烧锅外锅中，盖上内外锅盖，让食物在隔热的锅中继续利用余热焖烧。国内外电站锅炉水压试验标准的差异 - It analyses stress sustained by pipe during hydrostatic test and briefly introduces calculation formula deduced process of test pressures.
分析了静水压试验过程中钢管的受力情况，简要介绍了试验压力计算公式的推导过程。 - The hydrostatic test condition in the installed position shall be considered for design of all vessels.
所有容器的设计时应考虑安装后的水压试验条件。 - Differences between chinese standards and ASME code for hydrostatic test of utility boiler
国内外电站锅炉水压试验标准的差异 - A mathematical model about the duration of seal test of hydrostatic test for gas pipeline was developed firstly.
建立了考虑管道弹性变形和含有一定量气体时输气管道严密性水试压稳压时间计算的数学模型。 - Analysis on Hydrostatic Test Standard of Ductile Iron Water Pipeline in China
我国球墨铸铁给水管道水压严密性试验验收标准分析 - Hydrostatic Test Stress Measurement and Test Result Analysis of High Pressure Shell of Large Ammonia Converter
大型氨合成塔高压壳体水压试验应力测试及结果分析 - Research on Remote Pressure Monitoring System for Hydrostatic Test
水压试验远传监测控制系统的研究 - Some view points to the standard of the hydrostatic test for the gas cylinders were presented in this article.
本文针对现行气瓶水压试验国标提出了几点看法。 - In hydrostatic test and pneumatic test, visual inspection is a common inspection method, in the manufacturing process, visual inspection is also an important inspection method.
在水压试验和气压试验中，目视检验是经常使用的检验方法，在产品生产过程的检查中，目视检验同样是重要的检验方法。 - Furthermore, the prototype is experimented the hydrostatic test and provides the stress and strain results.
对缩比件进行外压性能测试，并给出了应力、应变测试结果。 - Reducing the stresses of spherical tank if possible; and adopting heat treatment or hydrostatic test to relief stress;
尽量减少球罐的各种应力，消除应力可采用热处理或水压试验； - Finally, we made a crane ship hydrostatic test, inherent the added mass and damping under natural frequency, compared with the interpolation results.
最后完成了起重船静水横摇实验，得到起重船模型在固有频率下的附加质量和阻尼系数，将计算结果与实验结果进行比较，验证了本文的计算结果。 - For the better modeling studies, machining a larger quartz nozzle and establish a visualization system hydrostatic test, practical pressure atomizer and the corresponding experimental system were studied at the same time.
为了更好的进行模型化研究，加工了放大的石英喷嘴，并建立了可视化的水压实验系统，同时用实用的离心喷嘴和相应实验系统进行了研究。 - Then create the finite element models of examples of gate valve body, set the boundary conditions, apply loads in design and hydrostatic test conditions to make statics analysis and calculation of the valve body with finite element software.
接着利用有限元软件对实例闸阀阀体建立有限元模型，设定边界条件，按照试验和设计工况施加载荷，对阀体有限元模型进行静力分析计算。